--------------------------------------------------------------------
/==\ \ / /==\ \ /== /=================================\
| | \/ | | |\ | Systems | The Resonant Gravity Field Coil |
+==+ || | | |||| Present | (or: how to manipulate reality |
| | /\ | | | \| | in a 530 square inch area) |
===/ \=/ \=\==/=/ \ \=================================/
____________________________________________________________________
| By Shadow Hawk |
| Theory, concept, and Idea by: ????????????????????? |
--------------------------------------------------------------------
NOTICE: Within this file will be presented a potential method of
altering the spatiotemporal continuum as one desires. I
take no responsibility for any use or misuse of this
information, whether harmful or otherwise. The effects
of this device, if used in a careless manner, can be
EXTREMELY DANGEROUS.
____________________________________________________________________
| Gravity Resonance? What is this nut talking about????? |
--------------------------------------------------------------------
You are probably thinking, "how can gravity possibly be resonant?"
This is a good question. As discovered by Thomas Townsend Brown,
electricity is directly related to gravity (see his U.S. patents
1,974,483, 3,187,206 in particular.)
If this is so, it is most likely a vectorial relationship (law of
opposites), and since there is already an electromagnetic vector (2
dimensional), a gravitational vector would be at 90 degrees to both
the magnetic and the electric vectors (since we are in a 3
dimensional space.)
The gravitational vector is like the "duration in time" of the
electric and magnetic vectors. There are also, in addition to scalar
electric and magnetic waves
(see Bearden, Thomas E. "Toward a new electromagnetics:
part IV: vectors and mechanisms clarified. Tesla Book
Co., Millbrae, California, 1983.
This work, however, fails to mention gravity waves, although it does
mention controlling gravity), there are also scalar gravitic waves
(see Ford, L.H and A. Vilenkin. "A gravitational analogue of
the Aharanov-Bohm effect." Journal of Physics A.
Mathematical, Nuclear, and General. (Great Britain).
14(9), Sep. 1981. p. 2353-2357.)
____________________________________________________________________
| Okay. So There are gravity waves. |
| How can resonating them control reality? |
--------------------------------------------------------------------
All of the above has been proven; this is where basically
theory comes in. There has been much supposed experimental proof of
these effects, however all current research is, unfortunately,
proprietary, and it is extremely hard to come by anything helpful.
The only good sources of information are some small mail
order book stores, and no one store has everything.
One example of publicized experimental proof is the
information regarding the largely ignored Biefield-Brown effect,
whereby gravity can be nullified and even reversed due to electric
charge
(see Thomas Townsend Brown, Above patents), and the book on
the Philadelphia experiment (and NOT THE MOVIE! The
movie was fiction, the book is an attempt to analyze
what little fact is known.)
The true Philadelphia experiment, if it actually occurred,
used a Navy ship degausser modified to act as some type of resonant
gravity vector coil.
The actual theory is that, since electricity can be
"transmitted" through the ether through electric scalar and vector
waves, and magnetic energy through magnetic scalar and vector waves,
why not gravitational scalar and vector waves, if they do exist (law
of opposites)?
A gravity wave is the temporal "shape" of the electric and
magnetic vector (I hope this is a good explanation!), and by
changing this shape you are changing the molecular construction of
the matter (or lack thereof) transmitting the waves.
Also, since there are an infinite number of parallel, real
universes
(see Hypernumbers II, by Charles Muses, January 1978
"Applied Mathematics and Computation", and his
introduction to Jerome Rothstein's "Communication,
Organization, and Science," The Falcon's Wing Press,
Indian Hills, CO, 1958),
the gravity vector coil MAY allow the psychic (scalar
electromagnetic brain wave) postulation of reality through the G-
vector. Thisяcould also be done with a computer, but both are beyond
the scope of this paper.
I will now present the plans for the construction of a simple
G-vector coil. What you do with it from here is up to you, show it
to your physics teachers and have them look up the references and
watch their eyes pop as they find out the speed of light is NOT
constant.
____________________________________________________________________
This, actually, is the hardest part. You will either have to
spend a lot of $$$ at a plastics company or have some good friends
to get but one of the parts needed, the others should be fairly
easy.
Listed in order of availability
(2) 50 VDC (DC-10 MHZ preferred, but...) @ 10A, 50KV isolated
power supplies
(parts list for those:)
(2) 110 VAC to 48 VDC @ 10A Isolated stepdown transformers
(500 watt)
(2) 100V PIV rectifier diode
Optional (2) Heatsinks for above
(2) 0-120 VAC @ 10A variacs (variable autotransformer)
(2) 80-100V @ 1000uF electrolytic capacitors
Optional (1 or 2) Case to hold it all in
(1) 25-100 KVDC (again, DC-10 MHZ preferred...) @ 100-400 uA
(not necessarily variable) 50 kV isolated power supply
(parts list)
(1) 10-12 KV @ 20-30 mA neon sign transformer
(4) TV HV diodes - 12-14 KV PIV
(4) HV capacitors, 500-1000 pF @ 10 KV
(1) 0-120 VAC @ 10A variac (variable autotransformer)
(1) Case to put it all in
about 7500 feet of #16 Guage heavy Formvar magnetwire
a lot (probably 5000 feet) of #20 or #22 magnetwire
some fiberglass tape
some plastic tape
TV HV corona dope
And, the clincher:
(1) Hollow plastic dia., about 30"-32" outside diameter, 24-26"
inner diameter, and about 4"-6" thick.
It must be hollow, thermosetting plastic, with supports for
an internal coil of wire, and two holes for the wire to
leave, spaced to avoid electrical discharges.
It must be boiling wax-tight, preferrably with a gasket.
And it should be openable, at least into 4 sections, with
screwholes (and gaskets if available.)
You also need enough of equal portions of Carnubura (sp)
beeswax, and paraffin wax to fill the inside.
____________________________________________________________________
| Construction |
--------------------------------------------------------------------
(1) Wind a 28" (about, must center inside the hollow part of the
plastic donut) "hoop" coil of the #16 magnetwire.
(see Illustration 1)
(2) Wrap first with fiberglass and then plastic tape, and then dip
it in TV HV corona dope. Allow to dry.
(3) Place the coil inside the hollow donut.
(4) Seal the donut, allowing an opening for the wax to be poured
into.
(5) Pour the wax into the donut, leaving as little air space as
possible.
(6) Seal the donut, adding any extra wax.
(7) Wrap approximately one layer of the #20 or #22 guage magnetwire
over the outside of the donut.
(8) Coat with HV corona dope.
(9) You are finished with the coil. It should look similar to
illustration 2.
See illustration 3 for a cutaway view.
--------------------------------------------------------------------
Illustration 1:
____________________________________________________________________
Top View Side View
__ ||
___/--\ ----- 1000 turns #16 magnetwire ----- __//|
| | __/||
---\__/ ||--
--------------------------------------------------------------------
Illustration 2:
____________________________________________________________________
Top View Side View
___ /-------------\
\\|// / / / | | | \ \ \
|\/ \/| --- Outer Layer of #20 ---| | | | | | | | |
|- -| or #22 magnetwire | | | | | | | | |
|/\ /\| | | | | | | | | |
//|\\ \ \ \ | | | / / /
--- \-------------/
--------------------------------------------------------------------
Illustration 3:
____________________________________________________________________
Cutaway (side) View
_____________________________________________________
/ / / / / // / / // / / / | | | \ \ \ \\ \ \ \\ \ \ \ \
/ / / / / // / / / | | | | _____ | | | | \ \ \ \\ \ \ \ \
/ / / / / / | | | | _______/*****\_______ | | | | \ \ \ \ \
| | | | | | ______/*******=======*******\_______ | | | | |
Plastic Donut ---|*******=====================*******| | | | | |
(hidden by wire)| |*******=====================*******| | | | | |
| | | | | | ------\***** --\ ======*****/------- | | | | |
\ \ \ \ \ \ | | | | -----\ \ === /----- | | | | / / / / /
\ \ \ \ \ \\ \ \ \ | | | | | ^ | | | | / / / // / / / /
\ \ \ \ \ \\ \ \ \\ \ \ \ | | / / / // / / // / / / /
----------------------- ^ | | --------------------
Toroidal Plastic "Donut"----^ | | \-
The ='s represent the inner "hoop".
Outer layer of #20 or #22 magnetwire or coil of wire.
The *'s represent the wax mixture.
--------------------------------------------------------------------
| Building The Power Supplies |
--------------------------------------------------------------------
If you are unfamiliar with electronics, you may need some help
with this section, as I am only presenting the schematics. Here they
are:
For both 50VDC power supplies:
____________________________________________________________________
/---\ /\
v | 100V Piv 15A diode / \
_mmmmm_+__ ___|\|__+__________________/0-15\__+
/ Variac )||( |/| | 1000 uF @ 80 V \DC A/
=)====== 110)||(48 --- electrolytic \ /
\__________)||(_____ /-\ \/
120 VAC 110V to 48V \ |-
Grounded Plug 10A Transformer \_+__________________________-
(2) of these are required. Note that
the stepdown transformer must be 50kv isolated.
--------------------------------------------------------------------
For the 100 KVDC power supply:
____________________________________________________________________
/---\
v |
_mmmmm_+__ ____________________+__________+____________________
| Variac )||( _|_ _|_ HV
| 110)||(8-10KV |/ \ /14KV PIV/-\cap
| ________)||(_____________||_ _v_ TV HV |
| | 100V to 8-10KV |\ \ | Diode +____+______
| | 100uA Transformer ^ \__+ | _|_ \
/___\ 800-1000 pf 10KV \ TV HV-^- \ /TV HV|
120 VAC capacitor \ diode/ \ -v-diode|
grounded plug \ -|- | _|_ /\
\______+ + HV /-\ / \
Note that all unmarked parts | | cap | / 0- \
have the same value as their | |/ | +/ 1000 \
marked counterparts. +_||_+_ |\ /
|\ \ -^-\ uA /
HV cap | / \ \ /
| -|- \/
| | !!
\_____/ TV HV
diode
--------------------------------------------------------------------
| Usage |
--------------------------------------------------------------------
To connect the power supplies to the coil, connect the wires
leading out of the donut (from the inner coil) to one 50 VDC power
supply.
The polarity, at this stage, does not matter.
Next, connect the leads from the outer coil to the other 50 VDC
power supply.
Do NOT turn either of them on! Now, connect one of the leads of
the inner coil to one terminal of the 25-100 KV power supply, and
connect one lead of the outer coil to the other terminal of the 25-
100 KV power supply.
Thats it!
--------------------------------------------------------------------
Now, the hard part. You will have to figure out some way of
modulating the fields. This could be done through stepper motor
control of the variac, or through the insertion of a probe coil
(probably just a ferrite rod wrapped with a few hundred turns of
wire) into the center of the donut hole.
This would then be modulated with whatever electromagnetic
signal you'd want to impress upon the field.
Through careful experimentation, you should be able to produce
some very interesting effects, such as extreme gravity, bending of
metal within the field, spontaneous materialization of ?, etc.
Note that the purpose of the wax is to act as a molten
dielectric, so don't be surprised when it starts boiling.
Thats why the donut form must be made out of thermosetting (or
any kind that doesn't melt near the temperature of boiling wax)
plastic.
Have phun, and don't do anything you wouldn't want perpetuated
throughout your subjective reality!
- Shadow Hawk
====================================================================
|Call these fine boards: |
|
| Ripco (312)-528-5020 |
| Wildfire Invitation Only |
| Pirate 80 (304)-744-2253 |
====================================================================
********************************************************************
Appendix to the above paper..............by Joseph John Misiolek
********************************************************************
There are two modifications to the above device which should make
the effect of the unit more powerful, while at the same time making
it more safe for the operator to conduct his/her research.
1. In place of the wax in the coil being used as a "molten
dielectric", it would be advantageous to use Glycerine instead.
The "scorch field" set up between the two coils using the 25-
100kvdc supply will be approx. 25 times greater in intensity
than with the wax.
While the dielectric constant (k) of wax is less than 3, the (k)
of Glycerine is about 56.
Also, the semi-liquid state that Glycerine maintains at room
temperature will prove to be an effective heat-sink for the
inner coil. Glycerine is an emollient, and can be obtained from
most drug stores.
2. The Modulator coil (250-300 turns) on ferrite core to be placed
into the interior of the coil shall be replaced by a coil larger
in diameter than the outer coil of the present unit (as herein
described) and shall be placed outside the units' outer coil.
This will give a more stable field configuration, while
confining the gravitational effects to the interior of the
device.
These two modifications, while increasing the units' power, will
also provide a level of safety not to be had in the original
design.
A word of caution! --------
While operating this device, it would be wise to secure a non-
interruptable power supply for it.
If, while the fields were at their maximum output, the power to
the coils were to be suddenly interrupted, a very serious
condition could arise as the distorted region of spacetime
surrounding the coil "cut-loose" into the surrounding spacetime
beyond the coils influence.
A "pulse" of distorted spacetime might, under these conditions,
leave the coil at high velocity, and inflict great damage to the
surroundings near the coil. (Including the operator)
--------------------------------------------------------------------
DON'T SAY THAT YOU WEREN'T WARNED!!!!!!!!!!!!!!
--------------------------------------------------------------------
